 |
 |
|
The
name Finlay is synonymous with quality mobile screening
equipment. The
equipment, manufactured in a purpose built facility in Co. Tyrone,
Northern Ireland, boasts the features necessary for high performance
and long life in the materials extraction and processing industry.
The Finlay mobile screens are traditionally used to segregate
sands and aggregates in the quarry and sand & gravel industries.
The 3-way split Finlay range provide extra mobility
with on-board stockpiling conveyors.
In recent years the addition of crawler tracks has ensured
even greater on site mobility.
The Finlay Trommels, both single and double skins are widely
used in compost segregation and more recently in recycling on
demolition and skip waste. These
robust machines are designed for the rigors of even the toughest
applications. The Trommel
range has both wheeled and tracked units available.
The Finlay Wash Plant equipment incorporates
years of experience with the latest innovations in sand and
aggregate cleaning. The
Hydrasander models provide continuous washing of construction
sand with relatively lower power consumption and minimal wear.
The Finlay Siltmasters enable the continuous cleaning of the
wastewater produced by sand and aggregate washing.
With the Siltmaster system installed no settling ponds
are required. The Siltmasters have been widely used beyond the sand
and gravel industries to clean waste effluents.
Other complimentary products within the Finlay wash plant
range include washing screens, scrubber barrels and logwashers.
This wide range of equipment allows Finlay in
conjunction with MH Screening Services to provide the end
user with complete turnkey installations.
|
Pilot
Crushtec,
founded by Mr. Dieter Scherf, has its manufacturing base near
Johannesburg, South Africa. The
current range of material processing equipment imported by MH
Screening Services include a wide range of Vertical shaft
impact crushers and the compact horizontal shaft
impactor.
The Twister AC06 – AC10 V.S.I. crushers use a stone on
stone impact to reduce the aggregate size and improve the stone
shape. Where
natural sand deposits are depleted the Twister range is also
used in the production of consistent manufactured sand from
excess aggregates on site. Their
use also extends to the mining industry where ores are
crushed prior to milling.
The BR0605 H.S.I. crusher is also widely used in mining and
quarrying to crush oversize aggregates. The BR0605 has
a 600mm rotor with a large feed opening of 545mm x 385mm to accept
large feed size material at moderate tonnage.
This reasonably priced skid mounted unit provides both
the quarry and mining industry with a cost effective way of reducing
oversize materials.
The Pilot S2R Rubblebuster incorporates this BR0605
H.S.I. crusher into a self-contained skid-mounted or wheeled
chassis. The chassis
comes complete with diesel engine, feed hopper, feed and discharge
conveyors. The S2R
Rubblebuster is specifically designed to process up to 35 tonnes
per hour of oversize material or rubble to produce an
end product high in fines. This
compact unit enables even the smallest stockpiles of waste rubble
and oversize to be crushed economically.
|
|
Ideachip
in Finland manufactures the ALLU range of equipment.
As one would expect from equipment produced in Scandinavia
the ALLU equipment is manufactured from the highest quality
components to the highest standards of fabrication.
MH Screening Services distribute the full range
of ALLU equipment throughout Ireland.
The ALLU processing bucket attached to either a wheel loader
or excavator is widely used to screen damp soils, mix
soils, aerate compost, crush glass and process other difficult
materials. The uses
for these processing buckets are as varied as there are material
processing applications.
The ALLU AS26 and AS38 provide the industry with
heavy-duty purpose built high capacity windrow turners for aerating
of compost, soil stabilizing and mass soil
handling. These units
can operate at up to 6,000 cubic metres per hour.
The AS26 and AS38 are both propelled via
crawler tracks powered by a diesel engine.
The ALLU Power Mix is an innovative and versatile attachment
for excavators. It can mix, aerate and crush
simultaneously on site for a very cost-effective operation. It will
process any material like clay, subsoil, contaminated
soil, sludge, frozen soil, blacktop, bentonite
mixed with clay, sand etc.
|
|
BL-Pegson
rock
and stone crushing equipment is world renowned for performance and
durability. The
production facility near Leicester, England uses the latest
manufacturing techniques combined with decades of experience to
produce a world leader in the field of rock and stone reduction
equipment.
BL-Pegson manufactures both single toggle and double
toggle jaw crushers. All units are designed for years of trouble free high
performance crushing with ease of operation and access for
maintenance also a consideration.
These jaw crushers are available on fully mobile road
trailer chassis and crawler tracks.
The Autocone, Automax and Autosand cone crushers
offer high performance in the further reduction of aggregate sizes
and sand. These high
performance high efficiency units produce the highest quality
aggregates with minimal running costs.
The options of self-contained trailer mounted and crawler-mounted
units are available also.
BL-Pegson has over 70 years experience in manufacturing water
pumps for the quarry and associated industries.
The VS and High Head range of pump has been
developed over many years with the aid of a test program run in
working quarries. The outcome is a reliable pump, which is built to
withstand the rigors of the quarry, mining and construction
industries.
|
|
© June 2001,
M.H. Screening |
|
